The N-SET-RSP Message contains all fields as defined in Table 10.3-6 and in Annex C. Each field shall conform to DICOM encoding and Value Representation as defined in PS3.5. Fields are required as specified in the N-SET service definition unless otherwise noted. Fields not specified in the N-SET service definition but present in Table 10.3-6 are required by the DIMSE-N protocol.
Table 10.3-6. N-SET-RSP Message Fields
|
Message Field |
Tag |
VR |
VM |
Description of Field |
|---|---|---|---|---|
|
Command Group Length |
(0000,0000) |
UL |
1 |
The even number of bytes from the end of the value field to the beginning of the next group. |
|
Affected SOP Class UID |
(0000,0002) |
UI |
1 |
SOP Class UID of the SOP Instance for which Attribute Values were modified. |
|
Command Field |
(0000,0100) |
US |
1 |
This field distinguishes the DIMSE-N operation conveyed by this Message. The value of this field shall be set to 8120H for the N-SET-RSP Message. |
|
Message ID Being Responded To |
(0000,0120) |
US |
1 |
Shall be set to the value of the Message ID (0000,0110) field used in associated N-SET-RQ Message. |
|
Command Data Set Type |
(0000,0800) |
US |
1 |
This field indicates if a Data Set is present in the Message. This field shall be set to the value of 0101H if no Data Set is present; any other value indicates a Data Set is included in the Message. |
|
Status |
(0000,0900) |
US |
1 |
The value of this field depends upon the status type. Annex C defines the encoding of the status types defined in the service definition. |
|
Affected SOP Instance UID |
(0000,1000) |
UI |
1 |
Contains the UID of the SOP Instance for which Attribute Values were modified. |
|
Attribute List |
(no tag) |
- |
- |
This field is encoded as a Data Set. One Data Element is encoded for each Attribute and Attribute Value applicable to the operation. |