The following Sections specify Modules used for Unified Procedure Steps.
Table C.30.1-1 specifies the Attributes that describe the progress of a Unified Procedure Step (UPS).
Table C.30.1-1. Unified Procedure Step Progress Information Module Attributes
|
Attribute Name |
Tag |
Attribute Description |
|---|---|---|
|
Procedure Step State |
(0074,1000) |
State of the Procedure Step. Enumerated Values:
See PS3.4 for details on Unified Procedure Step states. |
|
Progress Information Sequence |
(0074,1002) |
Information about work progress for the Procedure Step. Zero or one Item shall be included in this sequence. |
|
>Procedure Step Progress |
(0074,1004) |
A numerical indicator of progress expressed as percentage complete. NoteThis is primarily for status rendering (e.g., progress bar). The percentage is not necessarily an accurate indication of total time. |
|
>Procedure Step Progress Description |
(0074,1006) |
A textual description of progress. NoteFor example, it might contain "Annealing complete". |
|
>Procedure Step Communications URI Sequence |
(0074,1008) |
Contact Information to communicate with performers of the Procedure Step. Zero or more Items shall be included in this sequence. |
|
>>Contact URI |
(0074,100A) |
URI to communicate with performer of the procedure in progress. Any URI (telephone number, URL, etc.) is permitted. NoteThe VR of this attribute has changed from UT to UR. |
|
>>Contact Display Name |
(0074,100c) |
Name of the person, department or organization to contact for more information about the performance of the Procedure Step. |
|
>Procedure Step Cancellation DateTime |
(0040,4052) |
Date and Time at which the procedure step was discontinued. |
|
>Reason For Cancellation |
(0074,1238) |
A textual description of the reason a procedure step was discontinued. |
|
>Procedure Step Discontinuation Reason Code Sequence |
(0074,100e) |
Coded Reason(s) for Discontinuing the Procedure Step. Zero or more items shall be included in this sequence. |