Include Table C.36.2.2.5-1 “RT Control Point General Macro Attributes”.

Delivery Rate

(300A,063D)

2C

The intended nominal rate of delivery of the specified Cumulative Meterset (300A,063C).

Required if the conditions in Section C.36.2.2.5.1.1 are satisfied.

See Section C.36.2.2.5.1.

Delivery Rate Unit Sequence

(300A,063E)

1C

The unit of the Delivery Rate (300A,063D).

Required ifDelivery Rate (300A,063D) is present.

See Section C.36.2.2.5.1.

Only a single Item shall be included in this Sequence.

>Include Table 8.8-1 “Code Sequence Macro Attributes”.

CID is defined by invocation.

Beam Area Limit Sequence

(300A,0689)

1C

Area within which the treatment beam must be contained, for example when using MLC tracking for a moving target.

Only a single Item shall be included in this Sequence.

Required if beam shall be limited.

See Section C.36.2.2.5.1.

>Include Table 10.38-1 “Outline Definition Macro Attributes”.

The Outline is defined on the Beam Modifier Definition Plane.