The Blood Lab Measurements template provides for the recording of measurements made on blood samples obtained during a catheterization procedure. The type and anatomic source of the blood is recorded as acquisition context. The results from the blood chemistry measurement system are quoted; the measurement names may be pre-coordinated with the type or source of the blood, or generic measurement names may be reported. In the latter case, the full measurement concept name may be effectively post-coordinated using the recorded acquisition context.
Extensible
Significant
Table TID 3516. Blood Lab Measurements
|
NL |
Rel with Parent |
VT |
Concept Name |
VM |
Req Type |
Condition |
Value Set Constraint |
|
|---|---|---|---|---|---|---|---|---|
|
1 |
CONTAINER |
1 |
M |
|||||
|
2 |
> |
HAS ACQ CONTEXT |
CODE |
EV (R-00254, SRT, "Specimen Type") |
1 |
M |
||
|
3 |
> |
HAS ACQ CONTEXT |
CODE |
EV (G-C0E9, SRT, "Procedure site") |
1 |
M |
||
|
4 |
> |
INCLUDE |
1 |
U |
||||
|
5 |
> |
CONTAINS |
INCLUDE |
1 |
U |
$Measurement = EV (718-7, LN, "Hemoglobin") $Units = DT (g/dl, UCUM, "g/dl") |
||
|
6 |
> |
CONTAINS |
INCLUDE |
1-n |
U |
$Measurement = DCID 3524 “Blood Gas Pressures” $Units = DCID 3500 “Pressure Units” |
||
|
7 |
> |
CONTAINS |
INCLUDE |
1-n |
U |
$Measurement = DCID 3525 “Blood Gas Content” $Units = DT (ml/dl, UCUM, "ml/dl") |
||
|
8 |
> |
CONTAINS |
INCLUDE |
1-n |
U |
$Measurement = DCID 3528 “Blood pH” $Units = EV ([pH], UCUM, "pH") |
||
|
9 |
> |
CONTAINS |
INCLUDE |
1-n |
U |
$Measurement = DCID 3526 “Blood Gas Saturation” $Units = EV (%, UCUM, "%") |
||
|
10 |
> |
CONTAINS |
INCLUDE |
1-n |
U |
$Measurement = DCID 3527 “Blood Base Excess” $Units = DT (meq/dl, UCUM, "meq/dl") |
||
|
11 |
> |
CONTAINS |
INCLUDE |
1 |
U |
$Measurement = EV (122183, DCM, "Blood temperature") $Units = EV (Cel, UCUM, "C") |