EXAMPLE-MEDICATION-SYSTEM-GATEWAY conforms to the System Management Profiles listed in Table F.4.3-2. All requested transactions for the listed profiles and actors are supported. It does not support any optional transactions.
Table H.4.3-2. Supported System Management Profiles
|
Profile Name |
Actor |
Protocols Used |
Optional Transactions |
Security Support |
|---|---|---|---|---|
|
Network Address Management |
DHCP Client |
DHCP |
N/A |
|
|
DNS Client |
DNS |
N/A |
DHCP can be used to obtain TCP/IP network configuration information. The network parameters obtainable via DHCP are shown in Table F.4.3-3. The Default Value column of the table shows the default used if the DHCP server does not provide a value. Values for network parameters set in the Service/Installation tool take precedence over values obtained from the DHCP server. Support for DHCP can be configured via the Service/Installation Tool. The Service/Installation tool can be used to configure the machine name. If DHCP is not in use, TCP/IP network configuration information can be manually configured via the Service/Installation Tool.
Table H.4.3-3. Supported DHCP Parameters
|
DHCP Parameter |
Default Value |
|
IP Address |
None |
|
Hostname |
Requested machine name |
|
List of NTP servers |
Empty list |
|
List of DNS servers |
Empty list |
|
Routers |
Empty list |
|
Static routes |
None |
|
Domain name |
None |
|
Subnet mask |
Derived from IP Address (see service manual) |
|
Broadcast address |
Derived from IP Address (see service manual) |
|
Default router |
None |
|
Time offset |
Site configurable (from Time zone) |
|
MTU |
Network Hardware Dependent |
|
Auto-IP permission |
No permission |
If the DHCP server refuses to renew a lease on the assigned IP address all active DICOM Associations will be aborted.