EXAMPLE-INTEGRATED-MODLALITY conforms to the System Management Profiles listed in the Table below. All requested transactions for the listed profiles and actors are supported. Support for optional transactions are listed in the Table below:
Table B.4.3-2. Supported System Management Profiles
|
Profile Name |
Actor |
Protocols Used |
Optional Transactions |
Security Support |
|---|---|---|---|---|
|
Network Address Management |
DHCP Client |
DHCP |
N/A |
|
|
DNS Client |
DNS |
N/A |
||
|
Time Synchronization |
NTP Client |
NTP |
Find NTP Server |
|
|
DHCP Client |
DHCP |
N/A |
||
|
DICOM Application Configuration Management |
LDAP Client |
LDAP |
Client Update LDAP Server |
See Section B.7 |
DHCP can be used to obtain TCP/IP network configuration information. The network parameters obtainable via DHCP are shown in the Table below. The Default Value column of the table shows the default used if the DHCP server does not provide a value. Values for network parameters set in the Service/Installation tool take precedence over values obtained from the DHCP server. Support for DHCP can be configured via the Service/Installation Tool. The Service/Installation tool can be used to configure the machine name. If DHCP is not in use, TCP/IP network configuration information can be manually configured via the Service/Installation Tool.
Table B.4.3-3. Supported DHCP Parameters
|
DHCP Parameter |
Default Value |
|
IP Address |
None |
|
Hostname |
Requested machine name |
|
List of NTP servers |
Empty list |
|
List of DNS servers |
Empty list |
|
Routers |
Empty list |
|
Static routes |
None |
|
Domain name |
None |
|
Subnet mask |
Derived from IP Address (see service manual) |
|
Broadcast address |
Derived from IP Address (see service manual) |
|
Default router |
None |
|
Time offset |
Site configurable (from Timezone) |
|
MTU |
Network Hardware Dependent |
|
Auto-IP permission |
No permission |
If the DHCP server refuses to renew a lease on the assigned IP address all active DICOM Associations will be aborted.