The Centerline Wall Motion Template consists of a CONTAINER providing measurements of the centerline wall motion.
Extensible
Significant
Table TID 3209. Centerline Wall Motion
|
NL |
Rel with Parent |
VT |
Concept Name |
VM |
Req Type |
Condition |
Value Set Constraint |
|
|---|---|---|---|---|---|---|---|---|
|
1 |
CONTAINER |
1 |
M |
|||||
|
2 |
> |
HAS CONCEPT MOD |
CODE |
1 |
M |
|||
|
3 |
>> |
HAS CONCEPT MOD |
CODE |
1 |
M |
|||
|
4 |
> |
CONTAINS |
INCLUDE |
100 |
M |
$Measurement = EV (122450, DCM, "Normalized Chord Length") $Unit = DT (%, UCUM, "%") |
||
|
5 |
> |
CONTAINS |
NUM |
1 |
M |
Values shall be 1, 2 or 3 UNITS = EV ({sd}, UCUM, "Standard Deviations") |
||
|
6 |
> |
CONTAINS |
CONTAINER |
1-6 |
U |
|||
|
7 |
>> |
CONTAINS |
CODE |
EV (F-32050, SRT, "Cardiac Wall Motion") |
1 |
M |
||
|
8 |
>> |
CONTAINS |
CODE |
EV (R-404F0, SRT, "Circumferential Extent") |
1 |
U |
||
|
9 |
>> |
CONTAINS |
NUM |
1 |
M |
Unit = DT (1, UCUM, "no unit") |
||
|
10 |
>> |
CONTAINS |
NUM |
1 |
M |
Unit = DT (1, UCUM, "no unit") |
||
|
11 |
> |
CONTAINS |
CONTAINER |
1-4 |
U |
|||
|
12 |
>> |
HAS CONCEPT MOD |
CODE |
EV (G-C03E, SRT, "Finding Site") |
1 |
M |
||
|
13 |
>> |
CONTAINS |
INCLUDE |
1 |
M |
$Measurement = EV (122459, DCM, "Territory Region Severity") $ModType = EV (F-32050, SRT, "Cardiac Wall Motion") $ModValue = DCID 3703 “Wall Motion” $Unit = DT ({sd}, UCUM, "Standard Deviations") |
||
|
14 |
>> |
CONTAINS |
INCLUDE |
1 |
M |
$Measurement = EV (122461, DCM, "Opposite Region Severity") $ModType = EV (F-32050, SRT, "Cardiac Wall Motion") $ModValue = DCID 3703 “Wall Motion” $Unit = DT ({sd}, UCUM, "Standard Deviations") |
||
|
15 |
> |
CONTAINS |
IMAGE |
No purpose of reference |
1 |
U |
Content Item Descriptions
|
Row 4 |
Normalized lengths of the chords determined between ED and ES contour. The measurement template allows the specification of the statistical properties of the normal population and of the chord measurement relative to the population. |
|
Row 8 |
If the Circumferential Extent is not specified no limitations to the boundaries for regions are assumed. |
|
Row 11 |
The Regional Abnormal Wall Motion container holds the information on the severity of the decreased or increased wall motion of the 4 predefined regions as described in [Sheehan, 1986]. |
|
Row 12 |
The name of the region with an abnormal ventricular wall motion as described in [Sheehan, 1986]. |
|
Row 13 |
The severity of the wall motion abnormality expressed in Standard Deviations above or below normal in the territory region as described in [Sheehan, 1986]. |
|
Row 14 |
The severity of the wall motion abnormality expressed in Standard Deviations above or below normal in the opposite region as described in [Sheehan, 1986]. |
|
Row 15 |
Secondary Capture image with centerline analysis result |